Discussion Locked

Home network help

0 helpful
7 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I have 4 computers networked using 3Com HomeConnect phone line PCI cards:

Computer A has Win98 SE.
Computer B has WinXP.
Computers C & D have Win2k.

All of the computers can ping each other and consistently get replies. The problem is tryingto share files.

Computer A can see all of the computers and access their files, but none of the other computers can see Computer A. Computers B, C, & D can all see each other and share files just fine.

I've tried various network troubleshooters in Windows, and ones that I've found on the web. Nothing's helped so far.

Any help is greatly appreciated!

Thanks in advance,
Phillip Harrison

7 replies

by gm

I had the same problem with my Win2k Pro machine and a Win98SE machine on the same network. Is the drive for computer A shared on the network?

by result

Yep, it's shared. I used to have another Win98 SE machine on the network, and it could access Computer A's files. Odd, isn't it?

by sudney

The only thing I can think of is you don't have file sharing enabled on Computer A . I might be wrong...but I don't think a windows98 computer can be seen through network neighborhood with File Sharing Enabled in the network properties screen.

by acute computing

From previous replies, it doesn't sound like a file-sharing problem. I would therefore suggest you check which network protocols your machines are running. It sounds like you are running a TCP/IP network; possibly netBIOS is turned off on the A machine, or WINS isn't configured. Look to see if NetBEUI is present on any machines (I've seen this used on some small networks where a WINS server isn't present).

If all machines are running TCP/IP only, check that all the subnet masks and name servers are the same - use winipcfg on A, and IPCONFIG /ALL on the others (both from a DOS shell) - it may throw something useful up.

Hope this helps somewhat.

Pete.

by acute computing

From previous replies, it doesn't sound like a file-sharing problem. I would therefore suggest you check which network protocols your machines are running. It sounds like you are running a TCP/IP network; possibly netBIOS is turned off on the A machine, or WINS isn't configured. Look to see if NetBEUI is present on any machines (I've seen this used on some small networks where a WINS server isn't present).

If all machines are running TCP/IP only, check that all the subnet masks and name servers are the same - use winipcfg on A, and IPCONFIG /ALL on the others (both from a DOS shell) - it may throw something useful up.

Hope this helps somewhat.

Pete.

by result

Thanks Pete. After reading your reply, I investigated things further and discovered that TCP/IP wasn't configured properly on A.

Thanks to everyone else who replied as well. I'm a developer, and my networking knowledge is minimal at best. Your help is very appreciated.

Thanks again,
Phillip

This discussion is closed to new replies.