6 replies
by mrafrohead
This was what I did to make it work for me...
It was using three PC's, a hub and a cable modem.
Cable modem to PC1 Nic1.
Pc1 Nic2 to hub.
Pc2 and pc3 to hub.
Enable internet connection sharing on Pc1 Nic1.
That will automatically set Pc1Nic 2 to 192.168.0.1.
Make sure that your other computers connected to the hub are configured to dhcp.
Also for me I added NetBeui so I could also access the other computers.
Hope this helps... Any questions, let me know.
mrafrohead
@yahoo.com
by bbarthol
The cable comes out of the wall to a firewall >>
The firewall is then cabled to a wireless LAN router
Each of my PCs have a wireless LAN card in them
The IP address that the cable company gave me is now the IP address of the router
Hi,
I set mine up just like "mrafrohead": My 10bT NIC is on my Cable Modem; assigned as DHCP (from the Cable Co). 100bT NIC is on the home LAN hub. Other machines are set to DHCP. Activate connection sharing on the 10bT NIC. I set the Home LAN systems manually to the DNS at the cable Co, although I'm not sure that's necessary. The only issue I had was that my Firewall software on the Connection-Sharing machine denyed the other machines out -- Check that on yours.
by jimhm
You can also get a proxy server software -
Set it up this way -
Cable / DSL modem to the Link port of your hub.
Nic1-PC1 - Set to the Cable/DSL connection
Nic2-PC1 - Set for internal IP addressing
Nic1-PC2 - Set for internal IP addressing
Set Browser up for Proxy access...
Number of ways around the problem - you go a wide choice of solutions.
by iebfr14
by chipw
This discussion is closed to new replies.
Trending IT Employment posts
Sort by Trending