11 replies
by jameyw_98 Accepted solution
by balthor Accepted solution
by w2ktechman Accepted solution
by mcse420 Accepted solution
by cg it Accepted solution
you've done everything the KBs say to do to see the workgroup and shares.
can't think of anything else other than that maybe the printer driver isn't supported by Vista.
by esochin Accepted solution
I too have an XP computer on which I tried to replace an older Dell XP witha new one using VISTA. Same problems.. no access to and from two Dells, not able to print etc.
Dell suggests using disks to copy files back and forth and buying additional printers. Microsoft says it isn't their problem because I purchased the machine from Dell.
Linksys says they haven't figured it out yet.
Thanks Microsoft!!
by sundog1966 Accepted solution
by eayres Accepted solution
by prefbid ii Accepted solution
My network at home has been a mix of XP and Vista for some time. However, my wife decided to get a new laptop for her business and now it was essential that I be able to transfer her files and share the printer. I think I must have hit every problem under the sun trying to get the computers to talk. I also discovered that there is not a consolidated list of all the steps that need to be accomplished in order to get everything to work. So here they are--
On the Vista Machine:
1.In "Systems" ? "Change Settings", under "Computer Name" ? "Change": Change the default workgroup to the workgroup used by XP network e.g., ?FAMILY?. Then Reboot.
2.In Network and Sharing Center
A.Connect to a network
i.Add the information needed to connect to the wireless router
B.Turn on Network Discovery
C.Turn on File Sharing
D.Turn on Public Folder Sharing
E.Under Customize Network Settings
i.Set the network name to the name used on the router
ii.Mark as ?Private?
3.In Welcome Center ? Add New Users
A.Activate the Guest Account
4.Open up a regular Document folder and Add a new folder for sharing purposes.
A. right click the folder and select Property
B. select Share
C. Give the file a name and ?share?
D. Go into Advanced Sharing
E. Select the ?Share this folder? check box
F. Select Permissions
G. Make ?everyone? a ?co-owner? of the file.
?Allow? everyone full control.
5.Open up "Printers"
A. Add a Printer
B. Add a local Printer - Even if you are wanting to share a network printer, do not use the network option.
C. ?Create a New Port? & ?Local Port?
Enter the URL address of the printer ? my case //Widescreen/printer2
6. Norton 360
A.Disable Firewall ? If there is a way to get Norton Firewall to play nicely with an XP network I would love to hear about it.
B.Enable Vista Firewall
On the XP Machine (assuming it already is set up to share files and printer)
1. Install Link Layer Topology Discovery (LLTD) Responder on the XP machines.
2.If Norton Security is installed.
A. Open Norton and View Network Map
B. ?trust? all members of the network.
C. You *MUST* add the network you are on to your trusted networks inside of Norton. Open Norton. -> Select the Norton Internet Security Tab. -> Scroll down to bottom. -> Select the Internet Security and Firewall Options link. -> Select Trust Control. Locate your network and add to trusted.
D. Alternatively trust all your IP addresses in range.
by webehi2 Accepted solution
Thanks Prefbid...excellent list. Only thing was in Vista set up, #4, the flow didn't go quite that way for me, but I just did the folder the way I always did in XP and it was perfect.
Thanks again.
YOU DA MAN!!
by strizile Accepted solution
I just got myself a Vista Laptop.
I also have a XP PC and Laptop.
One printer on the XP PC and one on the Vista Laptop.
What I did was to share my printer on the XP PC and on my Vista Laptop.
What in the end did the trick was to use the Network Setup Wizard from the XP PC.
You will have to choose the option for non XP Os when asked and save it on a USB stick.
Plug it into all your other units and run the file from the USB.
If you get an error message then ignore it and just reboot.
Voil`a the trick is done.
At least it works fine with my network. I can see all networked units from any of the units on the network as well as all the printers and also print to them.
This discussion is closed to new replies.
Trending Networks posts
Sort by Trending