Question Locked

Hooking up Ethernet printer to network

0 helpful
2 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
Hello new on here great website, anyway I'm trying to hook a ethernet printer to a network, I did print the configuration page and it shows the ip, but I can't ping the ip address given, I have it plugged into a ethernet that works. Any suggestions why I can't ping also I wanted to delete the port currently and it won't let me, I tried server properties but says the resource is in use.

2 replies

by liame

Most likely the IP address of the printer is not on your subnet.

If your computers are on say 192.168.0.xxx and the printer 192.168.1.xxx they wont be able to talk.

How to fix it? Well if you have a dhcp server set the printer to get an address from that otherwise you will have to manually give it a new address. That can be done on the front panel of some printers, if not it will probably have a HTTP config page that you can open from a pc that you have put on the printers subnet.

This discussion is closed to new replies.