Question Locked

How can I enable my long-ago disabled onboard sound?

0 helpful
5 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Over a year ago I bought an external Creative SB external sound card so I could plug in various things to its face (like headphones, et cetera). I don't remember what I did, if anything, to disable the onboard sound card that my system came with, but a long story short I have unplugged my external card and I want to use my internal one again. I don't know how to do this though.. I see nothing in the Systems icon under Control Panel about an onboard card, and when I looked at the BIOS I saw nothing about anything onboard being turned off. I've downloaded the latest AC97 drivers as well, but still whenever I unplug my external my computer says there are no sound devices installed.

Help me, please. I have a EMachines T6532. It's all factory parts besides extra RAM and a newer, beefier graphics card.

5 replies

by older mycroft

Start > right click 'My Computer' > Properties > Hardware [tab] > Device Manager [button] > expand 'Sound, Video & Games Controllers' > look for your AC'97 entry.

Double click on it > enable it in the bottom box (assuming THAT is where you originally turned it off.).

by Former member

You will have to look slowly because sometimes it is buried, it should be marked "on-board sound" or something similar. Make sure (when you have found it) to mark it "enable". Then press the "F10" key and then confirm the changes with pressing "Y" (for yes) When your computer boots up you should see something like "found new hardware". Then load on your sound drivers disk from the disk marked "motherboard drivers". Or download the motherboard drivers from the website of your computer maker.If you can not find it in your bios then select "load default settings" or something similar in the bios. Hopefully your on-board sound will be activated.

Please post back if you have any more problems or questions.

by oh smeg

Though it is in all likelihood buried fairly deeply under a heading of something like Advanced then another Sub Heading like IO Connections.

It will be located somewhere like this not on the surface and needs to be enabled.

After you have it enabled save the changes on Exit and then restart Windows and follow the directions when you are prompted.

Col

by l-mo

1. I agree fully, it should have a setting in BIOS.

2.Yes, check your sound options; as mentioned above.

3. Also review your device drivers; check your audio drivers.

IMHO :)

This discussion is closed to new replies.