Question Locked

How do I reset my monitor? (Lenovo E75 Monitor)

0 helpful
4 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Hey all,

Great forum, I have found many useful tips on this site. It finally looks like I need some help of my own. Actually, I have a few problems at the moment. The one that is frustrating me the most is probably a fairly simple one...however, I can't seem to find a solution. I recently had my nieces using my computer and they must have been playing with the buttons on the monitor. Now the screen is off center and difficult to read. No matter how hard I try, I can't quite get it to look like it used to. My question is this, is it possible to reset your monitor to it's original factory settings? I have a cheap Lenovo E75 17" CRT monitor and I can't seem to find any info on how to default it's settings back to the original. It does have an option called "Recall" on it's menu screen but it only seems to default it back to it's original contrast and brightness settings. Any info or help would be greatly appreciated. And thank you very much in advance. I'm also working on a hard drive issue but I want to tackle it a bit more before I post again. Thanks again!

JS

4 replies

by nicknielsen

You should have four functions that change the position of the display on your screen: vertical position, vertical size, horizontal position, and horizontal size. These functions are recognizable in graphic mode by their depictions of offset displays (one vertical and one horizontal) and dimensional arrows.

For example, the horizontal controls will look something like this:
[pre]
___
|[|] and <->
---
[/pre]

by jonspencer19

No matter how much I fiddle with them, it does not fix the problem entirely. I was curious to know if there was some sequence or order in pressing those buttons in order to set the monitor back to it's original settings. Thanks for the input though...

by nicknielsen

1. Degauss the monitor.

2.Use the offset controls (up/down, left/right) to center the image.

3. Use the size controls to expand/contract it.

If you cannot center the image, you may have to take the monitor to a service center to get the aiming coils realigned.

This discussion is closed to new replies.