Question Locked

How do I upgrade USB 1. to 2.0; Windos XP SP3 Dell Laptop Latitude CPx J

0 helpful
6 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

As I'm a n00b please enlighten me as how does one go about changing a laptop from USB 1.0 to 2.0? Is it possible? Read up on "2-Port USB 2.0 Laptop Network Card." but will this allow for 2.0 speeds?
Any help &/or suggestions would be most appreciated. Thanks, Ron.

6 replies

by .martin.

it is not possible to upgrade a USB 1.0 to a USB 2.0, so you would have to look at getting a PCMCIA USB 2.0 card.

by wrleeii

The support for USB 1.0 or 2.0 is a hardware issue, so you'd need to get an adapter that supports 2.0 hardware. (How old _is_ that machine?!! :-) )

Bill...

by lil ndn

The PC card was a direction I was leaning. The machine was put into storage roughly a month and a half after I purchased in the mid summer of 2000(was going to use for work then my contractor broke down and supplied all of us with new laptops) until just 6 months ago. I did upgrade to 512Mb ram recently and have an external HDD thought about incorp. too if need be. Please advise if any new suggestions on the card use as to what brand, etc. Thanks again, I really appreciate the input/feedback, Ron.

by older mycroft

Buy a laptop then stick it in 'storage' after 6 weeks, then bring it back out into the sunlight after 8 years.

Sheesh.

by jnhager

You should just buy the cheapest one you can find. I would assume most of this type of hardware is made by a couple of factories in China and then just rebranded. Most wireless g cards are made by the same company.

This discussion is closed to new replies.