Question Locked

How to add drive to RAID 5 PE2650

0 helpful
3 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Hello all,

this is regarding a Dell PowerEdge 2650 (Win Server 2003 SP2) running a RAID 5 configuration, with Perc 3/Di (each drive is 18Gb 10K SCSI).
- Bios is up to date
- ESM is up to date
- Controller firmware is up to date
- & Latest OpenManage 5.5

My question is how to add an additional hard drive to increase space. The server can take up to 2 more drives. The new drives are 15K 73Gb SCSI, but I know that only 18Gb can be read due to the RAID 5 configuration and the limitation of the other drives.
What is the process to add a hard drive?
and how to format it?
I plugged the drive in, but the server didn't recognize it. Went to server administration, and found the actual drive 0.3, but the options given are:
- blink
- unblink
- set as hot spare
- prepare for removal

Are there any options to increase space?

I'm not very familiar with this setup, and don't have much experience with it. Any help would be greatly appreciated.
Thanks,

Karim

3 replies

by oh smeg

And Add Additional Drives there. As I'm not familiar with this particular Model/RAID Controller what generally happens on Boot is that you get a POST Screen then a Hardware Resources Screen then a RAID Option to enter Setup by that machine may have a different order. You need to use the designated Key/s to enter the RAID setup and add additional Drives there.

As for increasing HDD Space I have previously added HDD limited them tot he size of the existing Array and after replacing every drive and rebuilding the Array one drive at a Time I have then restarted the system with only the One Drive present and used GParted to change the Partition Information to the full capacity of the drive or the full capacity of the smallest drive that is in use. Then after every drive has been resized replaced all of the drives where they came from and then opened the RAID setup Routine and checked to see if the Array had been damaged by the resize.

Sometimes it works and sometimes you need to reinstall the OS and Array depending on the RAID Controller used.

http://gparted.sourceforge.net/download.php

Col

by scott_heath

You say you only have 2 drives, so you can't replace the existing drives and expand the logical drive. You also can't add 2 disks to an existing array as it is striped. I suggest you just create a 2nd logical drive and mirror the 2 disks. Then you'll have a 72GB logical drive to partition in Windows. I didn't find anything in the docs right away, but with many controllers you can replace all the existing drives with larger ones and then extend the logical disk.

Regards,
Scott

http://scottisageek.spaces.live.com

This discussion is closed to new replies.