Discussion Locked

How to build my internal network using Tata V-SAT

0 helpful
2 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Hai
I am a sys engg.
We use internet connection through V-SAT device and i have 2 lan cards installed on my server system. One is for external network and another for internal network.

In our another branch they are also using V-SAT connection and they use only one lan card in the server and they plug cat5 cable directly to switch.

Which setup is fast for internet connection?

2 replies

by johnysozi

Hi,
This is a very interesting challanging question on network building.I do not have a good answer but i am intereted in seeing the best system.Probably the network with a V-SAT connection with one LAN card and the use of a cat5 cable pluged in the switch.However,I need reasons as to why this could be the best. Help. Thanks for the challange question.

by michael kassner

The answer is very dependent on the equipment being used. If you are just worried about actual throughput, then the topology that has the server using one network adapter is most likely faster as only the traffic destined for the server is seen by it.

Whereas the other topology has all traffic going through the V-Sat gateway as well the server having two network adapters. Which pretty much requires the traffic to be processed twice, depending on what the server's role is.

More information about the complete setup would be very helpful and allow the members to give accurate responses.

This discussion is closed to new replies.