Question Locked

How to configure MRTG for monitoring CISCO's CPU and Memory utilization?

0 helpful
2 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I have running MRTG and i`m monitoring lots of interfaces on CISCO routers and switches, but i don't know how to monitor CPU's and memory utilization.
thanks

2 replies

by Former member

But all you have to do is "walk the SNMP tree" to find out the correct MIB OID's. From the walk, you can narrow down the CPU fairly easily enough. SNMPWALK is an old *ix command/program that you can run from a *ix box or even Windows nowadays, but you will probably have to download it.

Google mrtg snmpwalk and you'll get all kinds of answers.

This discussion is closed to new replies.