Discussion Locked

How to configure routing DSL/dial-up IP

0 helpful
3 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I have a DSL connection that I use for web browsing, email and connection to several remote computers. I also have to connect to several remote computers using dial-up IP. My question is this; How do I configure the connections for DSL to always use DSL connection? How do I configure my dial-up connections to only use the dial-up and not try to connect via my DSL connection?
I have noticed when I'm connected to a remote client via dial-up IP that my email client, Outlook 2000 uses the dial-up connection to retrieve my email. I would like my web browser and email to use the DSL connection only.

My hardware config is as follows:
1. Cisco 675 DSL router
2. Dell PC with 10/100 ethernet connection, Win98, IE 6.0, Outlook 2000

Any assistance would be greatly appreciated.
I have looked at putting entries in the NETWORKS table but not sure if that would solve my problem.

3 replies

by jeffrey lee

Well, bother!
If you want to use the DSL connection as your default connection, then you must change your connection setting.
> IE 6.0 > tools > Internet Options > connections > then you can set your default connection by selecting one of your conection types & click set to default button. Then IE connects to it's default when you request for the brosing.

For email client, you must change your default connection setting from your outlook 2000, go to
Outlook 2000 > Tools > Accounts > Mail Tab > choose your mail Acc. & click properties > then click the connection tab > then you can set your default connection for your mail client.

by miraclemax

Seems I didn't phrase my question too well. So let me try again.

I do have DSL set as my default connection for browser and email. My real problem is that my telnet connections via DSL fail when I try to use dial-up TCP to another client. If the browser and email don't function while I'm connected via dial-up to a client, thats okay. What I really want to prevent is my telnet connections via DSL failing because I've initiated a dial-up connection. My telnet sessions seem to want to "re-connect" via the dial-up connection instead of using my DSL connection. Any ideas on how to prevent this from occuring?

This discussion is closed to new replies.