The 10.0.0.* addresses are referred to as non-addressable and can only be used for local networks (behind a gateway using NAT (network address translation) or something similar). This is also true of the 192.168.*.* addresses. You can find out more that you will want to know at http://en.wikipedia.org/wiki/Ip_address to see if your addresses are, indeed, Internet addressable.
Now, back to the rest of your question. I don't understand what you mean by "I have my network deployed very well." If the network is already set up then what are these new IP addresses for?
Additionally, the services you mention are all on different ports so the IP address does not need to be different. With that in mind, lets move on to what you might really want to be doing:
You should have a firewall. This firewall should be capable of both port forwarding and NAT (as well as all of the other normal things a modern firewall does). The Internet side will have a fully addressable IP address. The LAN (Local Area Network) side can either be running DHCP and/or you can give your servers static addresses. For the sake of simplicity, let's just say that your server will be static addresses and your workstations will use DHCP.
If you set up the firewall with DHCP going from 100 to 199 (i.e.: 10.0.0.100 to 10.0.0.199) then you can assign your servers static addresses below 100. Your gateway shoud be 10.0.0.1 so don't use that elsewhere.
Next, set up your FTP server as, for example, 10.0.0.2; your mail server as 10.0.0.3 and your web server (if I understood that correctly) as 10.0.0.4.
You will next go to the port forwarding screen for your firewall/router and configure the FTP ports to be forwarded to 10.0.0.2 (same port numbers); the mail server to 10.0.0.3 (same ports) and the web server to 10.0.0.3 (same ports). A specific example is to tell the firewall "Forward port 80 to 10.0.0.4:80".
Does this seem to address your question?