4 replies
by pacific_main07 Accepted solution
by internetspider Accepted solution
If u r unable to detect hdd follow these options.
1. u have to enable sata IDE controler from ur BIOS.(in some laptops u have to disable options from the bios to turn on and detection of SATA).
2. Otherwise u have to update ur Bios.
by oh smeg Accepted solution
Just as they will not see any Fitted SCSI Drives or Optical Drives.
What you need to do to get this SATA Drive working is to install it allow Windows to open and then proceed to add new Hardware, here you will need the SATA Driver that came with the M'Board and install the SATA Driver and then after that is installed you may be asked to reboot so allow the system to restart and then open the Device Management Console go to the Drive Management locate the unformatted SATA HDD and Right Click on it then scroll down till you come to the format option and chose to format the HDD. You can break the drive up here into different partitions if you want to and when you format the Drive or a Partition a New Drive Letter will be allocated to that Drive/Partition and then you will have access to it.
Col
by pacific_main07 Accepted solution
THANK U VERY MUCH.
I WILL TRY IT NOW..
This discussion is closed to new replies.
Trending Windows Forum posts
Sort by Trending