Question Locked

How to diagnose a switched network without managed switches.

0 helpful
2 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Hello,

I have a situation here where I have a network that is built on unmanaged switches. I am experiencing slowness from the network, but I am not sure where the issue is. I would like to look at using a packet sniffer, but becasue I am on a switched network, this will not work.. I don't have access to a Port Aggregator, I wish that I did. We checked the firewall (Linux), seems to be no issues from TCP.

Any suggestions would be helpfull.

TX.

2 replies

by robo_dev

plug the hub into the switch port you want to look at, plug the sniffer PC into the hub and also the device that normally used the port.

I would start with the users who complain the most :)

WireShark is a very powerful free tool, but if you manage a big network, investing in a commercial product is worth the money.

While anything can capture packets (even Windows), the more money you pay, the more 'smarts' is built into the sniffer.

While products like the Fluke network inspector aint cheap, they can tell you in minutes what what could take hours or days to figure out with an ordinary sniffer.

http://www.colasoft.com/resources/vs_sniffer.php

http://www.flukenetworks.com/fnet/en-us/

This discussion is closed to new replies.