Question Locked

how to direct networking to xp 2 xp operating system

0 helpful
3 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
i am connect to two computer by direct cable connection(LAN). i am complete over all process like configure LAN properties ,and ping . but network is not stablish plz send me help

3 replies

by shady108

are u connecting one pc directly to the other via the network cardS? if yuo are you will need a cross over cable NOT a normal network cable. If you are using a switch/hub/router make sure both pcs have the same IP range i.e

with router ----------

router = 192.168.0.1 (disable DHCP)

pc1 = 192.168.0.2
subnet = 255.255.255.0
default gateway = 192.168.0.1

pc2 = 192.168.0.3
subnet = 255.255.255.0
default gateway = 192.168.0.1

without router -

pc1 = 192.168.0.2
subnet = 255.255.255.0

pc2 = 192.168.0.3
subnet = 255.255.255.0

by computercookie

how old are the network cards?

Most new ethernet adaptors don't care that type of cable you use.

What are you using to connect them;
is it a hub,
a router,
modem/router?

Please post further details re Hardware and OS!

This discussion is closed to new replies.