2 replies
by jcatulin Accepted solution
by nirvaeh Accepted solution
I am going to assume you know something about installing windows and ip addressing. But you know what happens when you assume.
After you install windows server 2003, make sure you get all the updates and turn on automatic updates. Also install a virus protection program.
Assign this computer with a static ip address with the DNS pointing to itself.
Then you go to manage my server (should pop up.) click add role to this computer, select custom, then select active directory. you will then assign your domain (yourdomain.com) and netbios name (YOURDOMAIN) and click next over and over again. Typically you wouldn't configure this as the DNS server, but if it is, then select, this server is the DNS server. After that is done, it will need a reboot and voila!
Go to manage this server and add the DHCP role. The instructions are pretty straight forward. Choose your range, if your range will overlap with any static ip addresses you are using, you need to add them to the exceptions list. You probably aren't going to use any wins servers. When the dns window opens, right click the server and select authorize. You should now have working DHCP.
This discussion is closed to new replies.
Trending Networks posts
Sort by Trending