Question Locked

How to Install XP/2k from HDD without CD/USB BIOS detection?

0 helpful
12 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

In other words, How can I install XP (or Win2k) from the main hard disk without CD-Rom or USB or Floppy detection from BIOS?

I'm working with an OLD laptop, especifically a Gateway Solo 5300, and BIOS doesn't even dare to recognize any peripheral at startup, and I don't dare either to find a solution to make BIOS detect the CD-Rom (unless there's an easy way).

I have:

- An IDE 2,5" enclosure
- MS-DOS 7.1 (with smartdrv.exe), BartPe, and HP format disk utility
- Windows 2k, Fundamentals (FLP), and win XP CD's.
- Other DOS-based utilities (DOS-to-USB, ntldrusb)

What I've done:

- Formatted the HDD, and then install MS-DOS with CD recognition. After installing it from the old laptop, I inserted the Win XP CD and started winnt.exe installation, but after copying files and rebooting it says the classic message "NTLDR is missing". Even if I replace that file and the ntdetect.com and other possible "corruptible" files nothing happens (I went to http://tinyempire.com/notes/ntldrismissing.htm too).

- Making the hard drive bootable as a WinPe CD-Rom to install WinFLP (http://www.comphell.cz/?p=10) to HDD, but after first reboot everything shows blank.

- I tried to make two primary partitions, one with 1.5gb and the other with the rest. I found in the internet many tutorials to install XP from a USB drive, So I "simulated" the USB drive by copying all files required for USB to boot into the minor-sized partition, and having the other partition with the XP disk files so I could install it later without replacing any files from USB in the bigger partition after rebooting. But it stills shows blank or the missing ntldr message (depending on the used methods for USBs).

What I "think" it could be done:

- I've read there's a way in Win98/ME by copying only the .cab files into the disk by making Windows installation automatic at first reboot, but that's only with those OS's. With win2k there's a similar way as I heard, but nothing I could known really.

--

So, that's it... if there can give me a hand I would be really, really appreciated. And sorry for my poor english.

Thank you!

12 replies

by tmalo627

BIOS should detect your peripherals. It sounds to me the boot priority is to look at the HD first. It's a fairly simple change once you enter into BIOS. Where it is located will depend on your version of BIOS, but if you move your CD-ROM drive to the top of the list, you should be able to boot from the XP installation CD. Make sure to format the drive again before you install it and avoid the "Quick Format."

by jacnail

Thanks for your reply.

I did those steps you mentioned. I formatted, then ordered the boot priority, but it's stills the same way: BIOS doesn't detect ANYTHING.

What else can I do?

Thanks

by dldorrance

Use your computer with the CDROM. Unhook the existing HDD in it and install the 2.5 inch drive in it after partitioning it. You will need an adapter to mate the pins on the small drive to an IDE cable (I assume both drives are PATA). Now load the OS from its CD onto the new drive in the old computer. Then transfer the small drive to the laptop. When XP starts up on the laptop it may ask you for drivers for that machine.

by tmalo627

But I think that would only work if the hardware is identical on the two machines.

by jacnail

Is just as you said, but I don't know if at first glance Win XP load your laptop drivers while copying installation files...

Thanks.

by dldorrance

by installing Windows XP on a blank, formatted HDD mounted on a computer with a VIA ITX motherboard. The hard drive was then moved to a Dell Optiplex computer and runs fine. I am using the Dell to type this email.

by rob miners

copy the I386 folder from your XP CD to the Notebook Hard Drive. Turn on the Notebook and you should end up with a DOS Prompt. Type in CD I386 and press enter. Type winnt.exe and press enter. Follow the prompts. It maybe an idea to copy your drivers to the HD as well as the I386 folder.

by jacnail

It has a little similarity my with first attempt in the post, but still there's no difference at the end. The same "NTLDR is missing" message appears after that.

Thank you for your help. I you have another idea, I will appreciate it as much as the latter one.

by tmalo627

Maybe you have a corrupted installation disk. Do you have another copy of the software you can try?

by dldorrance

If the laptop computer needs drivers Windows XP will prompt you to load them. So,as stated above, you may need to copy the laptop drivers on a floppy.

This discussion is closed to new replies.