Discussion Locked

How to locate the culprit of IP Conflict

0 helpful
3 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

HI,
We are currently experiencing an IP conflict on our network. Some other device is using the same IP as our firewall. The firewall is still functioning but when we shutdown the firewall to upgrade it and bring it back up we fear it will not beable to bind the address since the other device is using it. We have two pieces of information to work with, we know the IP address and the MAC address of the interface that is not supposed to be using that address. How can we gather more information such as a computer name which doesn't show up when the IP conflict is reported. Is there a way to track this device down, if so please share your knowledge / experiences. Thanks in advance..!

3 replies

by ginman

Are you using DHCP to issue your ip's or are you using static ip's?
Try this Ms Knowledge base article to see if that helps: (Q120752)

I hope this helps.

by slacker

open a command prompt window... Type in nbtstat -a (IP Address) without the parenthesis and the IP Address of the machine in question. Be sure the firewall is off at the time. This will respond with the machine name and any useer who might be logged into it at the time.
If that doesn't work. You can download a utility call WS_Ping ProPack from here...http://download.com.com/3120-20-0.html?qt=ws_ping+propack&tg=dl-2001
Run the "SCAN" with the "Resolve Names" box checked. It will list alldevices on your network with their respective names. Again... Make sure your firewall is turned off at the time.

by urnotready

Actually after you ping the IP (with the firewall shut down), check your local arp cahce (arp -a), you can get the MAC address from this. Then go to http://coffer.com/mac_find/ and type in the first 6 digits. this will tell you who makes the network card which will help narrow it down if it's a printer or Mac, etc..

You can also try accessing the host through different ports (http, telnet, etc... For example many printer nics, switches, etc have a web interface, so if you http to the IP, you may open the interface.

If you have NT and W2K on your network try browsing to \\\c$.

This discussion is closed to new replies.