If it is about 8 MEG's it is the space left over from the Partitioning of the HDD. If it is considerably bigger it is the Recovery Partition.
Shouldn't be a Partition that contains the BIOS files as now these are included in the actual M'Board. Though you may not see the SATA Drives in BIOS itself depending on several things but the most likely is that the BIOS doesn't Natively Support SATA HDD's so you have to load a SATA Driver allow Windows to install.
Ideally you should fit the Old HDD to a USB Enclosure and use it from there to recover your Data or clone off that Drive. Depending on what it is you want to do here to replace the HDD.
You can use Ghost to clone the Drive if you have a copy or you could use the Trial version of Acronis True Image Workstation
http://www.acronis.com.au/enterprise/download/ATICW/
To clone with but this is Time Limited so you need to make sure that you have everything finished in a reasonable time or buy the product. It is worth the price and works very well.
Ideally you should remove the SATA Drive as a Slave as it does have Boot Data on the Primary Partition which will want to boot off that drive even if you where to install Windows again to the New HDD.
If you remove this drive from the Boot Order it saves potential problems so fitting it to a USB Enclosure is probably the best alternative.
Col