Discussion Locked

how to network properly

0 helpful
4 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
im having trouble networking 2 computers together, i've got 2 network cards but i dont know if i need a HUB?

4 replies

by justanadmin

If it is limited to just the two computers, you can hook them together directly with a crossover cable plugged in from one network card to the other card.

The other option is using a hub, and in that case you would use two straight through network cables from each network card into the hub.

Either way should work just fine.

by thechas

After you decide on using a hub, switch, or cross-over cable, make sure that the work group name is the same of both computers, and that the computer names are different.

If you wish to transfer files between the 2 PCs, you will need to enable file and printer sharing in the Network applet of Control Panel.

Here is a good site for helping set up your PCs.

http://www.wown.com/

Chas

by gar2n

I use a router, takes all the work out of config problems and has a great firewall

This discussion is closed to new replies.