Question Locked

How to recognize Second Sata Drive

0 helpful
4 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Hi everyone,

Here is my setup. I have an 160G IDE Drive with Windows XP Home Edition on it and I have a 1 Tb Seagate Sata drive setup as slave.
I see it in the bios and I see it in disk management. I had this Sata drive on another pc with Windows Xp Pro before and it was formatted to NTFS with no operating system file storage only. What I want to do it recognize it and give it a letter...
My problem is in Disk Management it see's it as Disk 1 with a setting of Dynamic and an exclamation point over it. Just to mention nothing is visible for this drive in "my computer" When I try to Select it and right click on it it only gives me an option to Convert to Basic.. however I have vital information I have on it and do not want to lose. Any suggestions. The only thing I haven't done cause right now I am at work is rescan disks. but it is there so I don't think that would be an issue.

Thanks in Advance to all who reply.

4 replies

by older mycroft

According to M$:

NOTE: Dynamic disks are not supported on portable computers or on Windows XP Home Edition-based computers.

WARNING: After you convert a basic disk to a dynamic disk, local access to the dynamic disk is limited to Windows 2000 and Windows XP Professional. Additionally, after you convert a basic disk to a dynamic disk, the dynamic volumes cannot be changed back to partitions. You must first delete all dynamic volumes on the disk and then convert the dynamic disk back to a basic disk. If you want to keep your data, you must first back up the data or move it to another volume.

http://support.microsoft.com/kb/314343

Clearly, if you need to retain the data on this Dynamic disk, it will have to be re-fitted to an XP Pro system and the data transferred off first. ;)

by e_hennen

I did not even think of that...
Thank you ever so kindly.

This discussion is closed to new replies.