Discussion Locked

How to rejoin an NT doamin?

0 helpful
13 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
My office users NT4WS & W95/98 laptops join to other offices' NT doamin because business trip. After they come back and try to rejoin back to the domain, the system always show user name or password error. But I know they are correct. I did try remove their computer names from the domain and move them to workgroup and rejoin to the domain. It still doesn't work. Is anyone know what is the solution without reformat the HD? Thanks.

13 replies

by kenalmoore

Remove each computer account from the Domain on the PDC, Server Manager. Have each PC join the workgroup, then the DOMAIN.
Because the laptops are physically removed for a period of time, the PDC (Domain Master Browser) doesn't recognize the pc name( netbios Name). The browse list is upated 3 times at 12 minute intervals then removed from the list.

by johnco

If you are using DHCP server and TCP/IP protocol, the lease period on the IP addresses for these laptops might be expiring. You can change the length of the DHCP server's lease period using DHCP Manager.

by joe_hou

Sorry for I didn't state my IP setting. We are using static IP in local office. Most other offices are using DHCP. Thanks for your trying to help.

by qultptry

You don't state if you are using static IP's or DHCP in which network. I the exact problem within our school buildings and mobile users. We have gone to static IP's for just this reason. You also don't state if the Domain's are the same and userlogon and passes are identical on both domains. If you use statics IP's and domains are the same, it's a simple user change with a reboot. User simply types new domain, and all gateways are entered in the TCP area under advanced. Unfortunately, the 95/98 laptops don't have an option to have multiple gateways, so user entry will have to be keyed. We have found static IP's to best our best resolution to this problem,

by joe_hou

Sorry for I didn't state my IP setting. We are using static IP in local office. Most other offices are using DHCP. IP setting and Doamin name are correct by the laptop locations. Thanks for your trying to help.

by vikas viswam

1.Might sound silly,but while adding to a different domain,the administrators there might have changed the ip adress settings of the laptop to suit their network requirements such as dhcp,wins etc. was this reverted to the old settings when the trying to add the laptop back to the same domain.

2.if your were using lmhosts file in the laptop that could have been modified

by joe_hou

We are still using static IP in local office. Most other offices are using DHCP. IP setting are complete correct by the laptop locations. Thanks for your trying to help.

by mcalhoun

An ideal way to fix this problem would be to to installone one BDC in each Domain fron different domain. Assuming that you have WAN
connectivity between different domains. It can a low end PC just designed to perform NT Domain replication.
Anotherway it would be to create computer accounts on all those domains for all traveling amployees.

by joe_hou

We use singel domains in most local offices. Your ideas will help on the problem. Thanks.

This discussion is closed to new replies.