How to Remove the NWLink IPX/SPX Protocol from command in Windows XP
I have to remove NWLink IPX/SPX Protocol in 200 sysytem.
OS: Winodws XP SP2
Windows Forum
I have to remove NWLink IPX/SPX Protocol in 200 sysytem.
OS: Winodws XP SP2
by sp-admin Accepted solution
by rob miners Accepted solution
Go to Control Panel, Network and Internet Connections, Network Connections, right click on Local Area Connection, highlight Internet NWLink IPX/SPX and select Uninstall.
If you are trying to do it from the command line you could try this.
How to Remove the NWLink IPX/SPX Protocol, CSNW, and GSNW with a Batch File
by sp-admin Accepted solution
APPLIES TO
? Microsoft Windows NT Server 4.0 Standard Edition
? Microsoft Windows NT 4.0 Service Pack 1
? Microsoft Windows NT 4.0 Service Pack 2
? Microsoft Windows NT 4.0 Service Pack 3
? Microsoft Windows NT 4.0 Service Pack 4
? Microsoft Windows NT 4.0 Service Pack 5
? Microsoft Windows NT Workstation 4.0 Developer Edition
? Microsoft Windows NT Workstation 4.0
Back to the top
Keywords: kbinfo KB239834
by rob miners Accepted solution
a lot of this old stuff still works in XP and M$ does'nt always update it. It was worth a try.
What you will need is snetcfg.exe as it will apparently do it. I haven't tested it so I am unsure of the outcome.
C:\>snetcfg /?
snetcfg [-v] [-l ] -c -i
where,
-l provides the location of INF
-c provides the class of the component to be installed
p == Protocol, s == Service, c == Client
-i provides the component ID
The arguments must be passed in the order shown.
Examples:
snetcfg -l c:\oemdir\foo.inf -c p -i foo
...installs protocol 'foo' using c:\oemdir\foo.inf
snetcfg -c s -i MS_Server
...installs service 'MS_Server'
OR
snetcfg [-v] -q
Example:
snetcfg -q MS_IPX
...displays if component 'MS_IPX' is installed
OR
snetcfg [-v] -u
Example:
snetcfg -u MS_IPX
...uninstalls component 'MS_IPX'
OR
snetcfg [-v] -s
where,
-s provides the type of components to show
a == adapters, n == net components
Examples:
snetcfg -s n
...shows all installed net components
OR
snetcfg [-v] -b
Examples:
snetcfg -b ms_tcpip
...shows binding paths containing 'ms_tcpip'
General Notes:
-v turns on the verbose mode
-? Displays this help
-- Download from here
http://www.peabird.com/ftp%20PEABIRD/GAMME%20USB/PEAB-PCI-COMBO/ALi/M5632/Share/SNETCFG.EXE
http://www.rockhollywood.net/media/U2Link-201a/Share/snetcfg.exe
by sp-admin Accepted solution
The Following command used to uninstall IPX/NWLINK
snetcfg -v -u MS_NWIPX
..............
Thanks a Lot for support
by rob miners Accepted solution
This discussion is closed to new replies.
Sort by Trending