Discussion Locked

How to set IP Address to my PC..?

0 helpful
7 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I am using a PC with OS Windows 2000 Server Professional. By default it is showing IP address as 127.0.0.1. But, for running my application, this IP address should be other than 127.0.0.1(there is a check for this at the application start up, otherwise application won't start). How to set other IP Address to my System?

7 replies

by 3xp3rt

For setting the IP address first do you need is a network card. If you already have one go to control panel, network connections and right click on Local area connection. Select properties, TCP/IP properties and type your desired IP address.

by kiran_sk3

Thanks for immediate response...
Yes, I have network card...and I had set IP Address using TCP/IP properties...but it is not getting reflected..I tried to see the new IP address what I have given..using ipconfig at command prompt. But, it is not getting reflected.

by blackcurrant

Hi

Which IP address are you trying to input? There are certain ranges of IP addresses which are intended only for 'local' use.

Did you try inputting 192.168.0.1 - this is an address in the allowed range.

Good luck

by cg it

blackcurrant is right. Need to know what addressing your using. There are public and private addressing. you need to set your NIC as a private Class A,B or C address with the appropriate subnet mask.

in the control panel network connection, right click you network connection and try to repair it. or try and reboot to make the changes to the nic take effect [though you shouldn't have to]

This discussion is closed to new replies.