7 replies
by borginva
It is very hard to test a mother board unless you have the proper equiptment or send it to a repair ($$$) shop. If your mother board is an older one, you might want to look itdo an upgrade and reap the benifits.
If it is a newer board, I would see the problem in either the controller card or the mother board itself (in the controller port/slot or elsewhere on the board).
Try replacing the controller card first. It is the cheapest way (and you can always return the card if it does not work).
Give it a try.
by bullheaded
by thechas
It is possible for the motherboard to be bad.
It is more likely, that the CPU or memory has a problem.
There are numerous utilities that can run performance and burn-in tests on a mother board.
One I have used is Check It.
I think they ar enowpart of Smith Micro www.smithmicro.com
You can run a "burn-in" from a DOS floppy.
There are numerous causes for scandisk at boot. If you are running Windows 98, you should install the large hard drive cache supplement via Windows Update.
Chas
by bullheaded
by tsweany
by bullheaded
by bullheaded
This discussion is closed to new replies.
Trending Desktop posts
Sort by Trending