Question Locked
how to use cisco 1841to implement a WAN and LAN
0 helpful
1 reply
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
my WAN connection from the transmit modem connects to the cisco 1841 router via serial0/0/0. the receive modem connects to the router via fastethernet0/0.how do i route properly so that i can use the fastethernet0/1 for the LAN? specifically, i need to route fa0/0 to fa0/1; and fa0/1 to serial0/0/0. how do i get this done please?