Discussion Locked

HP Desktop keeps rebooting in 2000

0 helpful
5 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I have a Windows 2000 image that I created that works on multiple hardware platforms. For some reason though, on our HP VL6 Series 8 desktops, after I load the image, the computer just keeps rebooting after it goes through the "Starting Windows" screen. If I install Windows 2000 from scratch on this hardware model it works fine. We are using Sysprep 1.1 on our image which enables us to specify different mass storage controllers depending on hardware. This allows us to have one image that works on different types of hardware. However, the HP has the same controller as our other hardware models that are listed in the Sysprep.inf file. Has anyone ever run into this type of situation? Any help would be appreciated.

5 replies

by idtent

I don't know if this will help but I ran into the exact same problem but it was on Dell notebooks. I skip all the details and tell you that what fixed it was flashing the BIOS. One the machine had the most curent BIOS I could ghost the image run sysprep and everything was fine. I hope this helps, Good Luck!

by terry slavens

We have ran into this same problem and updating the BIOS seemed to help on some systems.

I noticed that you are specifying different mass storage controllers in the sysprep.inf. We are trying to do the same but here is the scenario:

I have the two inf files referenced on my source computer (mshdc.inf
and scsi.inf). They are in the \winnt\inf\ folder.

I have copied the \i386 directory to the root of the c: drive but
this did not help.

A copy of our SYSPREP.INF file can be furnished if necessary.

If we run the older version of SYSPREP with the same SYSPREP.INF file,
we do not receive any errors. Our manager wants us to run the latest
version so we may take advantage of the -pnp option.

Any help would be very much appreciated.

This discussion is closed to new replies.