Question Locked

HP dv9628nr LCD Display will not work until external vga monitor is connect

0 helpful
8 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

HP Pavillion laptop 9628nr
Will boot to external monitor. Then works after reboot to laptop display. I have checked:
Display Driver Nvidia 7150/M nforce 630M
RAM
LCD connections - motherboard
Power management settings (Sleep hibernate OFF)
Power adapter
PheonixBIOS ver F.08 (f.32 avalable)

After it appears fixed, (booting with external VGA monitor and then rebooting to laptop diplay) I power down for 2 hours, go to reboot and black laptop screen while I hear windows booting...

There is a BIOS flash update but I really am not sure if it will help.

8 replies

by technogeek-1995

You might have to change windows display settings via setting a new default display. The default display might be set as the external monitor when someone wanted to extend the desktop because they didn't check to mirror the monitors. Happens to me all the time! I gotta know the OS to help.

by financeqt1

So after way to many hours dealing with every software, driver, firewall to hardware, wiring, RAM, power possibility.. It turned out that it was, in fact, the lid closure and clasp. So if anyone else has this problem, after repairing by booting with an external monitor attached, restoring to an earlier point and then rebooting so the laptop dosplay works, DONT CLOSE THE LID and reboot. If it still works and boots to the laptop display then for kicks and giggles, close the top either all the way so the lid clasp connects or bring the lid down far enough so the rear "sleep" contacts make contact so the screen turns off and reboot. Dimes to doughnuts you won't get your laptop display back on until you boot with the external monitor attached again. HP/Compaq really did try and save money with the lid closure system. Oh and it doesn't matter if you change the power management settings to "Do Nothing" when closing lid or "Never" turn off monitor. Well that was a good waste of 20 odd hours!!

by older mycroft

The fact that you initially declared that you had already checked the LCD, I imagine most of the Peers thought you'd checked it too! ;)

by financeqt1

Considering I checked wiring to and from the panel lid and all was well.. It didn't occur to me that it was a hardware issue, it really did seem software related. Thank you for reading but the remark sort of hurt my feelings, considering I spent so much time on this & I am no rookie. Believe me, I have beat myself up for this dumb error enough without embarrassing me & making me feel like an even bigger dope in front of my Peers. I guess I learned not to post my findings when it could prove to be excessively humbling and extremely embarrassing. I just wanted to make sure no one else overlooked the most obvious of solutions. I should have kept quiet. Blushing & Humbled :(
-g

by older mycroft

I got fooled by the exact same problem many years ago. It was even worse when it was pointed out to me by a third party.

It takes a bigger and better man to speak out than to keep shtoom! ;)

This discussion is closed to new replies.