Question Locked

HP HDD into an Acer Veriton 5100

0 helpful
5 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

My HP carked it after a power outage a few weeks ago and I am currently trying to add it to an Acer PC, preferably as a primary HDD. The HP didn't come with XP CD's, but had a recovery partition.

When I tried to boot up with just the HP HDD the screen went black after the 'POST' sequence, couldn't even access safe mode.

How do I get it working?

Azhren

5 replies

by wizard-09

How may hard drives are you using, one or two what is the jumpper settings for the HDD is there any error messages on the screen is the light coming on on the HDD ?

by azhren

1 ACER
1 HP with 2 partitions - Recovery
- Main

Jumpers are set on CS

No error messages.
I can access HP HDD as an ordinary disk on slave.

by older mycroft

No way - that won't work.

The recovery partition is assuming that the hardware is still the HP machine, but it's going to detect ACER hardware.

It's like you being cryogenically frozen in Condon, Australia - then a few hundred years later you are warmed up and brought back to life only to discover you don't recognise the terrain and all the folk are speaking a language you don't understand - because you're now in Outer Mongolia.

Would you feel at ease? No, neither would an HP installation in an ACER PC. ;)

During ANY M$ installation, there is a degree of interaction between the HDD and the motherboard. In this case the installation is expecting a particular motherboard with an equally particular chipset on it - which won't happen.

The only similarity between these two machines is that they are both referred to as a [b][u]PC[/b][/u].

by thechas

The reason the Acer will not boot from the HP drive is that the HAL (hardware abstraction layer) for the 2 computers are different.

What you usually have to do to get a hard drive with an installed OS to boot on a different PC is to perform what is called an in-place-upgrade. Basically, you install Windows without wiping out the existing registry. To do this, you would need an XP CD for the Acer.

You might, repeat might, be able to configure the HP drive as a slave and get your files off of the drive.

As to using the recovery partition, the license for Windows that comes with an OEM computer is pretty specific. You CANNOT transfer Windows to a different computer period! In most instances, the recovery disks for the major PC manufactures will not allow you to even start a Windows installation on a computer that does not report from the BIOS that it is that specific brand computer.

Chas

This discussion is closed to new replies.