Question Locked

HP Pavilion zv5000 wont turn on

0 helpful
4 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Just wondering if anyone might be able to help me.
My zv5000 has all of a sudden decided it doesn't want to work.
When I turn it on, nothing happens. If the DC adaptor is connected, the charging light comes on but the laptop still wont turn on. This made me think it's probably not a faulty power jack, as many people have found this problem to be caused by on zv5000's. The power button has not moved position, so I know its not "stuck off", and I've bought a new battery so it's not that either. I was thinking the ram might not have been seated properly, but reseating it doesnt help.
There's no smell or ticking or beeping while the adaptor is plugged in either.
I've also checked the ram & HDD with other equipment so I know they're all working ok.
However, the screen has been over-extended, and I haven't had a change to take the screen off and check if maybe a snapped cable is causing a short or something, because the screen is proving very difficult to get apart, most likely due to the damage the idiot who over-extended it caused it.
Would the charging light still be working if the power supply itself was stuffed?
The only thing I can think of that it may be is a shorted fuse on the motherboard, something due to the screen being over-extended or a dead cpu. any ideas?
I'm hoping it could still be the power supply or something I can repair myself.. otherwise I may have to throw it away and buy a new one because it's just not worth paying to fix it when I can get a new one cheaper than the repair cost.

4 replies

by markgatehouse

I have very similar symptoms to you manda. But mine turns itself off, usulally when the cable is touched directly or indirectly. When I have had similar problems in the past, dismantling and cleaning the cooling system has worked in preventing shut downs. This one though I think is a psu issue. have you had the machine yanked by the cable at all? Mine had to be repaired for such an incident and was delared fit by the HP engineers and did not cut off for several months after the repair, but i think it might have bent the connector or something. I cannot find a spare for this part or instructions on accessing the power socket. This thought is reinfored by the fact that a wiggle of the cable cn cut mine off. Finally have you tried rocking the power switch to the right. this is where the trip is located so the switch has to pivot over the led illumination. Lets hope the answer iis out there...

by simmtron

I have the same model and when I press the power button nothing... BUT if I press the power button quite hard (very firmly)it turns on. It could be dirt on the contacts.

by kjuerss

Hi Adam

I had the same today. What have you done? Changed the Hard Disc?

Interesting for me...

Thanks Kay

This discussion is closed to new replies.