Discussion Locked

I can't change network ID

0 helpful
7 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I run the win2k pro, also connect to a LAN. The interesting thing is I can't browse entire work, when I click it, it appears "The network is not present or not started". But other clients can see each other on the LAN.
Also I can't change the network ID....

HELP

7 replies

by curacao_dejavu

go to start, programs, administrative tools, eventviewer, look at the system and the apps.
Check that in the system that you dont have any error messages.
Most likely the nic of a related service didn't start. Thats why you cannot see the network ;replace the driver of the nic or replace the nic.

by chrissysru

Hey,

Check the back of the nic jack, make sure the green light is on. Another problem you might be having is that your computer might not be added to the domain of your network. You might still be under Workgroups instead of your network domain. If you get your computer added to the domain correctly, you should be able to change your network ID with ease.

by ovidiu

At Logon, on the last line of the box, is the correct domain listed? If not, than You should add first Your computer to the domain, by using the local administrator account, and giving an identity to the computer in the ... domain.
Example:

Name: Yourname
Password: Yourpasword
Domain: Yourdomain

If not, You should log in as :

Name: Administrator
Password: Adminpassword
Domain: LOCAL MACHINE (the name of Your machine)
and from My Computer (RC)->Properties-> Network ID, You can modify it's appartenence to a domain and the computers ID.
After completion, You will have to log off, and log in again, this time on Yourdomain.
This should work. Good Luck

This discussion is closed to new replies.