Question Locked

I have two different networks -- need to be able to print to same printer

0 helpful
4 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I have a rather large office that I have two different internet providers for-for fail safe reasons. One I will be using strictly for wireless. I need both networks to be able to access the same printers. Is there some type of print server that can handle this or software or even if I need a pc to just handle this traffic. I am open to any suggestions. I just need to get the job done. Thank you for any ideas.

4 replies

by churdoo

I don't know of any print server appliances that are designed to serve 2 different networks. You say this is a large office, then do they have server(s), active directory, any other shared resources besides just printers? If so, how do they access the other shared resources? Do members of the 2 different networks need to share files with each other?

One way, not knowing the rest of the story, is if you have a server or PC with dual NIC's, you can attach one NIC to each network and share the printer(s) through this PC or server.

Another way is to install a real router and route between the networks.

Difficult to suggest which method is best not knowing what else they have happening at the site.

by my_pcfixer

Thankyou for resonding....Ok lets call them networks A and B. A is running Server 2003 and B will just be running a a wirelss network. They dont need to file share with B. Just need to be able to use some of the same printers. I have a PC that acts a print server for A and if there is a way to have a seconde nic card work for network B than I think this would be the best way. I have already physically added the second nic card to it but dont know what to do next...would appreciate any help. Thankyou.

by churdoo

Cable the 2nd NIC in your print server workstation to network B, and give the print server a valid static IP on network B (leaving the default gateway blank on the network B NIC). Verify pingage from a network B wireless client to the network B IP of the PC.

The last question is that of authentication. I'm not sure if you're running Active Directory on network A, but for B to use the shared printers on the print server, you'll probably have to set up a dummy user on the Active Directory to allow network B users permission to connect to the shared printers.

This discussion is closed to new replies.