Question Locked

IBM Netfinity 5000 Not Detecting PS2 Mouse - Configuration Change

0 helpful
4 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Hi. I have a Netfinity 5000 running Windows Server 2003 and am running an old serial mouse on it. That's what I've always used.

I recently got an 8 port KVM switch, and I wanted to put the server on the KVM. The KVM of course, requires a PS2 connection, which the server has. From an available KVM cable, I currently have the PS2 keyboard plugged in, and the serial mouse plugged in, and the monitor connection plugged in. The mouse PS2 connector is just dangling there. When I attempt to plug that in, the computer boots up and says there has been a configuration change, and refuses to boot Windows. I can't get past the configuration change window, it just asks me if I'd like to enter the configuration, and I get nothing. It's just a blank screen. All I want to do is use my PS2 connector on the server so I don't have to have a nice KVM switch, nice monitor, nice keyboard, and 8 mice.

Just to varify, it's not the mouse or the KVM switch. It's something to do with the Netfinity 5000 not liking to go to PS2 for a mouse connection, I've tried a few other PS2 mice.

4 replies

by link470

Anybody else use IBM servers who may know how to change from a serial mouse to a PS2 mouse and bypass the configuration change message in Bios? It won't let me past.

by ritosh

You've probably long-since resolved this, but I just came upon the post... So, after you've selected to save the configuration change (Netfinity 5000 just needs acknowledgment after any hint of a config change) the system goes straight to a blank screen and hangs, and doesn't proceed with the reboot?

by link470

Ya, what I've been doing to get around it since I only have to reboot or turn it off in the event of either a power failure [off] or an update or installation [reboot], is I plug in a serial mouse, boot the machine, and then right after the machine posts, in between posting and showing the Windows Server 2003 boot screen, I plug in the PS2 mouse lead from the KVM. I can safely unplug the serial mouse at the login window, and the PS2 mouse works just fine on the KVM.

This discussion is closed to new replies.