9 replies
by nikki96
In IE, go to Tools->Internet Options
Click on the Connections tab.
What are the settings? There should be a dial-up network in the box. Is there?
Your ISP's program is supposed to set the settings for their own servers. If it didn't or they got lost, try re-installing their software, reboot your PC, then try it.
Make sure there are settings in IE. The default is blank (none)
Also, make sure you are actually dialed in to your ISP before trying to bring up IE.
HTH
Nikki
by millerlt4m
by duckhntr2001
First get yourself into the internet options area,(start, settings, control panel, internet options) under internet options click on the connections tab at the top. Make sure the connection to your ISP is highlighted and click on the "make this default connection". Next click on the settings tab in the box with your dial up highlighted. At the top of the page select "automatic configuration". Next at the bottom of the screen in the dial up settings box select "properties" and then the server types tab at the tob. At the bottom of the page a box with the protocol settings should have the TCP/IP protocol selected. Next click on the settings for TCP/IP and for earthlink select the boxes for "server assigned IP Addresses" and "server assigned name server addresses" and both boxes at the bottom of page checked. The other providers I am not sure what there settings should be.
Kind of long but I hope it helps.
by millerlt4m
by dmiles
The possibility that your TCP/IP settings are corrupt
Open the Control Panel,double-clickl on the Network icon
Click TCP/IP protocol,press properties
Make sure that obtain IP address is dotted,then click on WINS configuration tab,click Disable Wins Resolution
click OK
One other thing to try is delete the Network,then use the Operating System disk to re-install
Delete the ISP software and then re-install,also apply this to IE 5.0
by millerlt4m
by canucker
Usually you pick up your ISP DNS server addresses automatically but in cases you don't.
After logging in with ISP from command prompt enter ipconfig /all
if their is no DNS address find out what it should be and manually enter into TCP/IP properties
Or whatever DNS servers you would like to use. As long as connected to internet backbone it don't matter what DNS server you use
by millerlt4m
by millerlt4m
This discussion is closed to new replies.
Trending Desktop posts
Sort by Trending