Question Locked

In-place reinstall of Vista?

0 helpful
7 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I've got Vista Home Premium on my laptop. It came pre-installed with it and has been rock stable, until last week's updates.

After the updates, it won't boot. It won't even boot in safe mode or safe mode with command prompt or with last known good configuration. It does the same in all cases -- it looks like's going to come up, I see the mouse pointer and can move it some, but no desktop appears, then it will spontaneously reboot. When it comes up next, it says Windows didn't start up correctly.

I had an external mouse and keyboard connected, disconnected them. No change. So, I went poking around the recovery tools on the DVD. I couldn't find the DVD that came with my Toshiba laptop, but I have another Vista Home Premium (Upgrade) DVD that I have and tried to use it. I found a number of repair options.

The first was an automatic repair. It failed. So, I then tried the boot repair. It found no errors. So, I tried to do restore point. It listed 3 possible restore points, but, it fails to be able to restore any of them, saying the files are corrupt.

At this point, I was wondering about health of my drive, so, I opened a command prompt and did a chkdsk /f /r on c. It found some minor errors which it said it corrected. So I ran it again and it came back clean. Tried to boot again, same results.

So, at this point, I figured that I could do an inplace reinstall. I've done that with very good success with XP. But, even with all those repair options on the Vista DVD, one that I could NOT find was to do an repair inplace installation. If I would tell it to do an install, it said it was going to rename the Windows directory and that the old Windows installation would be unavailable.

So, the primary question I have is, can it be done? That is, can I do an install on top of an existing installation that would (hopefully) fix what's broke and keeping all my installed programs in place. As I said, I've done that many times with success on XP.

I'm wondering if the problem might be that I had SP1 on my laptop but the DVD I have is original release. Is that an issue? Or maybe the problem is I don't have the right edition of the DVD? Or, maybe it just isn't possible with Vista?

Any clues on next step? I'd rather not have to do a clean install. But, if I have to, I'm going to put XP on it. I've simply never had an XP installation fail to the point of being unrecoverable, unless the hard drive died. In my case, my hard drive seems fine, based on my chkdsk results.

7 replies

by nepenthe0

[i]I've simply never had an XP installation fail to the point of being unrecoverable, unless my drive died.[/i]

One of our most distinguished members ([i]robo_dev[/i]) put it this way:

[i]In most respects, Vista is like that attractive woman who treats men like dirt. You put up with it if you like the pretty face[/i]...

http://tinyurl.com/4avayk

Rick/Portland, OR

by speedie6

Yes, I'm aware that Vista has its problems. I had put Vista on my desktop, but reverted it back to XP recently. But my laptop came came pre-installed with Vista, and, until last weeks updates, been totally reliable. And I was hoping to find a way to get it back up without having to reinstall all my applications. That is why I was trying to find a way to do an in-place reinstall.

So, either there is a trick to doing it that I don't know, or it can't be done. That's what I'm trying to find out. If it can't be done, then I am certain to go with XP.

by nepenthe0

My experience with Vista is limited. I have some reference material, but this does not explicitly discuss wholesale OS repair.

At this point, the computer won't boot. If you have files that you wish to retrieve from the hard drive, it may be possible. Since you cannot boot the computer, I suggest removing the hard drive.

You may wish to review Greg Shultz' excellent Jan'06 TR post [i]10 things you can do when Windows won't boot[/i]:

http://tinyurl.com/5tl82j

You should see half a dozen perimeter screws along the bottom of the computer case, and a central screw, marked by embossed arrows on the plastic case. Remove the screws, carefully lift the keypad bezel, and you will see the thin rectangular hard drive, often secured by a single bracket screw.

You can then plug the hard drive into the Coolmax adapter:

http://tinyurl.com/6bm6zd

Plug the USB cable into a working computer. The laptop hard drive will be assigned a drive letter in [i]Explorer[/i] mode. Just as you would transfer files using [i]Explorer[/i], try to salvage the files you want from the laptop hard drive.

Now you can reinstall the hard drive in the laptop. At this point, your best overall option is to attempt a complete reinstallation of Vista. A [i]clean install[/i] is the preferred method, which is why I recommended that you try to save your files before doing this.

Please post back in this thread if you encounter further problems with the Vista reinstallation. I may not be able to offer much help, but others more knowledgeable about Vista installations will surely come to your rescue.

Rick/Portland, OR

by speedie6

As far as getting files off, I have a number of options. I have booted the system from the DVD which has a command prompt option. I can see my files. Also, I have booted with BartPE, a rescue disk and I can see my files there too. But if I'm going to do a clean reinstall, then I'll just go with XP. I was just trying to avoid having to reinstall my applications.

by 1bn0

This is a new laptop. They should be able to provide technical support.

Many computers today, and most home user models, do not come with a recovery cd. Instead they install the required files on a hidden recovery partition that you can access during the boot process. This usually only allows you to wipe out your machine and reinstall to factory load.

If you are lucky you can create one using software provided on the computer. Search the start menu.

If there is a way to use the recovery mode or user created recovery cd's to do a re-install the manufacturers tech support should be able to tell how to do it.

This is your best / safest avenue of support if you want to recover your installation.

You may want to try to recover data files before you do anything.

Thats a different problem but a recommended first step anyway.

by speedie6

I bought my Toshiba laptop on the day that Vista became available retail. (Yes, I was a fool...) So, that makes my laptop over a year old already. At any rate, I doubt they would be able to help me find out if an in-place reinstall is possible or not. That's a question a bit beyond what an average vendor tech can help with. If a clean install is what is needed, and, it probably is, I can handle it myself. I was just trying to find some kind of confirmation of what I am seeing, that there doesn't seem to be any way to do an in-place reinstall. I've done that with XP many times with very high success rate.

This discussion is closed to new replies.