Question Locked

Inputting audio in Vista

0 helpful
4 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
Using a Gateway notebook CX210x with Vista 32 bit, we are unable to import music from such external devices as a cassette player. We have tried Audacity and Roxio. We have tried to use the microphone input at the front of the computer. The computer picks up ambient noise (conversation, etc) very nicely, but no music from the player.

4 replies

by mjd420nova

There are many plugin cards that will do what you want and a large cross section of USB type external devices that do a very good job. Inputting from a line output of a cassette deck into the microphone jack will create a huge impedance mismatch but it should have given you some sound. Besides, most microphone inputs are mono anyway, unless that's not really a concern.

by older mycroft

Microphone inputs are generally speaking, all in stereo these days.

As to copying cassette tape music, the best and cheapest (and simplest) method is to buy a 3.5mm trunking cable - that's a length of twin core cable terminated at either end by a male 3.5mm jack plug.

Insert one jack into the headphone socket of a Personal Stereo (like a Walkman or similar) and put the other end into the Line In socket on the back of the computer. If the computer is a laptop, the Line In socket is also the Microphone socket, you just change its function from the Mixer Controls within 'Sound & Audio Devices' in Control Panel.

You'll need to strike a happy medium if you use the microphone socket instead, since as mjd420nova has pointed out - the impedance levels on a microphone socket will create massive impedance imbalance.

ANY Line Out sound source is unaffected by that devices sound volume controls - it is a standardised output level designed for plugging into another sound device.

by older mycroft

That'll be the one that's picking up all these ambient sounds, while the one you've physically plugged in is NOT working at all.

BY DEFAULT, microphone input levels are [b]MUTED[/b] - that is, the connection of a physical microphone will not provide any input until you go into the sound controls and Enable it. You'll also have to access the Recording Device page and make sure that the computer is 'listening' for a microphone input. You cannot have Microphone AND Line In both activated at the same time, since they both share the same internal circuits.

This discussion is closed to new replies.