Question Locked

Inspiron 6000 BIOS Issues

0 helpful
5 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Good Day All:
I have an Inspiron 6000 laptop that I inherited from the guys at the office. It hasn't ever worked right when Windows was installed/reinstalled, (various odd operating errors) and installing Windows is nearly impossible due to various cryptic error messages during the install. The motherboard was replaced twice and the issues remained. I went over it good and proper, (new memory, HD, everything else) and still came away with no success. I shipped it back to Dell and they again replaced the board, which yielded no change. Now it won't even POST and I'm fairly sure either the BIOS is hosed or otherwise corrupted. I removed/replaced the BIOS battery and nothing changed.

I'm curious if any of you have dealt with really icky BIOS issues on an Inspiron 6000 and had any tricks to get it re-flashed or fixed, (jumper adjustments, etc). It's been so long now that the warranty is dead and Dell is no help. The box is essentially unused and I hate to give up before exhausting all options. If I could get BIOS to behave I think I could get Windows loaded again. Any ideas helpful. Thanks.

5 replies

by older mycroft

I find that rather hard to believe.

What did the tech report say when you received it back?

by nmurry

I've been in this business almost 10 years, and I've never seen a box quite like this. After the first two board replacements, we could not get windows to install due to the same peculiar errors. The third board replacement now has caused the machine to fail at post. I just hate to give up on a basically new machine.

There was a report, but all it said was what they replaced. No details. Thanks, Dell.

by oh smeg

The first is to buy another M'Board and replace the one currently mounted in the Chassis. As the BIOS Chip is soldered tot he M'Board it's not easy to reprogram it and it's certainly not safe for the M'Board.

The Expensive way is to buy the EPROM Programing equipment to program a EPROM while on a M'Board and learn how to use it correctly. Should only cost you about 3 to 4 times the Cost of a New M'Board and then whatever it costs to learn to use it safely for the M'Boards.

Or you can do the sensible thing and break it up and sell the parts minus the M'Board on a place like E Bay.

Col

by nmurry

Yes, that last option has crossed my mind. I hate that, since a free, essentially unused laptop will go to waste, but what's the point if I have to pour hours into a potential repair. Anyway, thanks.

This discussion is closed to new replies.