Question Locked

Installing a GeForce 7300 GT 512MB DDR2

0 helpful
3 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I am trying to replace my old ATI Radeon 9200 128MB for a GeForce 7300 GT 512MB DDR2. In the instructions says that i have to uninstall the controllers of the ATI Radeon 9200 128MB but i don't know what to uninstall. What i did is i went to "control panel" then to "add or remove programs" and remove the things that say "ATI software Uninstall Utility", "ATI control panel",and "ATI Display Driver". Then i turned off my computer an took off the video card and installed the GeForce 7300 GT 512MB DDR2, but when i turned on my computer my CPU did turned on but the monitor stayed off and nothing appears. So if somebody please could help me you all are welcome. I have a Intel Pentium 4 processor 3.20GHz1 with hyper-threading Technology, Microsoft Windows XP Home Edition and 512MB PC-3200 400MHz DDR. 530G Hard drive.

3 replies

by thumbsup2

ATI's are hard to get rid of. Try booting in safe mode, set the display adapter to Microsoft's Standard VGA (or however it's worded now), go to the device manager and make sure the ATI device isn't showing up as a second device, then reboot. If the card is working, Windows should start the install process.

Also, before you boot anything, make sure the card is properly inserted down tight and locked into the slot.

If this doesn't work, tell us what motherboard you have.

(dang... you got a 512MB card? Wish I had one!!!!)

by oh smeg

AGP, PCI or PCI XPress.

Replace the Old Card and boot the system when Windows is open right click on the Desktop and chose properties then Settings and to remove the ATI Drivers you need to delete the ATI Driver as listed in the display panel.

As for no Video from the new card if it is AGP it is possible that it isn't supported by the M'Board so we need to know the Make & Model of the M'Board or if it is an Off the Shelf computer the Make & Model of the Computer so we can look to see what is inside it.

Col

This discussion is closed to new replies.