Discussion Locked

Installing a printer-W2000 Professional

0 helpful
7 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
On a W2000 Professional notebook, I installed a network printer using the Printer Wizard. The printer does not have W2000 drivers available, but W2000 installed the printer anyway. I cannot print to this printer. How do I tell W2000 to update the drivers, like using the old "Have Disk" option (where you tell the system to look for the drivers)? Note: Right-clicking on the printer icon & selecting Properties does not produce the properties menu of this printer.

7 replies

by dmiles

Plug and Play devices are not included on the Windows 2000 CD,the drivers should be part of the director folder that points to the path of the drivers.

by drdon

Go to Printers on the start bar, right click the printer you want to change the drivers on. Go to properties, and advanced. You will see a bar "New Driver" use it to update the driver you need.

Some older printers are compatable with certain newer drivers so be sure to check the mfg home page for correct driver.

Hope this helps

by oridjinn

Some people didn't read all your question, realizing that you said the properties isn't displayed when right clicking. What you need to do is delete the printer, then add a printer locally with the correct driver (just choose a free port and make sure not to share the printer or print a test page). After adding the printer locally, you will be able to right click and see the properties, then just change the path from local port to a network port (add port) TCP/IP port - as long as the printeris TCP/IP which most are nowadays. Hope this helps!

This discussion is closed to new replies.