Desktop

Ask something
Discussion Locked

installing remote software remotely.

0 helpful
1 reply

by rgajjar

Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Hi guys!
I am looking for some advice.
I am currently working on a project to set up a new nt network for a brand new bulding. As part of the project I been asked to install remote control software (CONTROL IT/REMOTELY POSSIBLY)to the 1700 pc's tobe set up on site.
Rather than go one by one to install is there anyway installations can be done automaticaly, say via use of a login script? I currently use KIXSTART as the login script.

There are remote control applications that can be installed remotely by specifying the IP address/net bios name but I have to use Remotely possible/control it as we only have a licence for this.

Any ideals guys? Or is this impossible to do?
any views/comments would be appreciated.

1 reply

by zlitocook

Sure but you need to do alot of things first. Check out M.S. first for remote installations and boot on lan. All new computers need to be able to boot from the network with the mac address and installation can start from there. A log on script needssome one to login for it to work. If the software is already loaded you can boot the computers up with a preloaded batch file or script that will let them connect to the network and a login script will install the rest.

This discussion is closed to new replies.