Discussion Locked

Installing Vista, XP and Linux to a new laptop

0 helpful
3 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I recently buy a new laptop which comes with Vista installed and because I find it very slow, I try to install another OS while retaining the original Vista to play with. I encounter several problems but finally I succeed in putting 3 OS's on the same laptop and everything works. Here I explain what I do.

The computer I use is an Acer Aspire 9300 with AMD Turion64x2 processor, 2 Gb of memory, 120 Gb on disk drive and 17" screen 16:9 format 1440x900 pixels.

Step 1 ? Before doing anything else, create system restoration disk using the software provided by Acer.

Step 2 ? Repartition the disk drive. First try was made using gparted from a LiveLinux CD and keeping a first partition of unknown type which contains the Acer Vista system and utilities before first system start. So I create :
1 ? original 8Gb primary partition.
2 ? NTFS 19 Gb primary partition with Vista installed (C: drive)
3 ? NTFS 19 Gb logical partition to install XP (D: drive)
4 ? Ext2 19 Gb logical partition to install Linux.
5 ? FAT32 50Gb logical partition for data shared by 3 different OS (E: drive).

Step 3 ? Reboot the computer : Vista is working !

Step 4 ? Install XP Pro on D: drive.

Step 5 ? Reboot the computer : XP starts but unable to start Vista !!!

Step 6 ? Reinstall Vista from the recovery DVD (C: drive only, no choice !)

Step 7 ? Reboot the computer : Vista is working but unable to start XP.

What happens : The multiboot feature of previous Windows versions is not recognized by Vista and the XP installation has but some XP files on the C: drive (boot.ini, NTLDR & ntdetect.com) cancelling Vista boot.
There is an MS utility to install multiboot in Vista, but it does not exist in the Vista Premium OEM from Acer (The OEM install includes only the drivers needed by the model of computer, it is not a full install !!!)

Step 9 ? Erase everything on the disk drive and repartition with Ranish utility (available on SystemRescueCD), I note that first 8 Gb primary partition was described as "Compaq Diagnostic" (seems strange ?) :
1 ? NTFS 19 Gb primary bootable partition for Vista
2 ? NTFS 19 Gb primary partition for XP
3 ? Ext2 19 Gb logical partition for Linux
4 ? FAT32 58 Gb logical partition for data

Step 10 ? Try to reinstall Vista from recovery DVD. I get a message saying no disk drive available !!! Probably need the "Compaq Diagnostic" partition to work ?

Step 11 ? Using Ranish utility, I change the size of the FAT32 partition to 50 Gb and create a new 8 Gb primary partition (Remark : you can have only 3 primary partitions on a disk drive and an extended one in which you can create several logical partitions). What partition type for this partition ? Ranish has no option to format a "Compaq Diagnostic" partition, so I create a FAT32 one and after formatting I change the type to "Compaq Diagnostic".

Step 12 ? Reinstall vista from recovery DVD. Now it works !!!

Step 13 ? Reboot the computer, Vista is working as previously.

Step 14 ? With Ranish, makes the second primary partition bootable instead of the first.

Step 15 ? Install XP Pro on the C: drive which is now the second primary partition.

Step 16 ? Reboot the computer, XP is working.

Step 17 ? With Ranish again, makes the first primary partition bootable.

Step 18 ? Reboot the computer, Vista is working.

At this step, the two Windows version are working but I need a boot manager which is not provided by Vista, nor XP.

Step 19 ? Install Linux openSUSE 10.2 on the third partition, which includes GRUB multiboot on the first track of the disk drive.

Now I have 3 OS's on my laptop with an easy to use boot manager :
Windows Vista Premium Acer OEM version, Windows XP Pro and Linux openSUSE 10.2

Hopefully, Acer provides all the XP drivers and utilities for this computer on the support Internet site and I found madwifi driver for Linux !!!

3 replies

by paullam

Hi Michel,

I also have an Acer Laptop pre-load with Vista and trying to install the XP. I don't need to repartition because the machine already came with two primary partitions C: and D: as well as the 8Gb recovery partition. Actually, I did what you did up to step 7. The Vista is running again after Recovery DVD reinstall and XP is not visible.

Since I have not erase the disk, I don't think I need to do step 9 to 13 of yours. Now, start from step 14, I don't get it.

Firstly, what is Ranish? You mentioned in step 9 that is available on SystemRescueCD. What is that SystemRescueCD? I don't have that with my system.

Secondly, how can you make your machine reconise all OSs? Now my XP is still in D: drive but the machine does not show it as OS.
I think both my C: and D: drive are bootable since they did them individually but just not available at the same time.

Thanks for you help in advance.

Paul

by valmic

You are right, if you already have a free D: partition, you don't need steps 9 to 13, but you need steep 14 to hide the first primary partition and make the XP installation process think that the second primary partition is the C: one.

You need to do 2 things :
1 - Because Microsoft systems always install some boot files on the C: drive, you need to hide the partition on which you install the first system (Vista in your case) before you install the second one (XP in your case), so the second partition is seen as C: for the second install.
2 - Because Vista and XP have incompatible boot process, you need to install a boot manager to choose your running OS, in my case I use GRUB which is installed with openSUSE Linux.

The tools I use :
- RANISH : It is a partitioning tool, like Microsoft FDISK but with more capabilities.
It is available at : http://www.ranish.com/part/
(choose Partition Manager 2.43 for download), the program name is part.exe
RANISH must be run from DOS : from a bootable floppy, a bootable CD or a bootable USB key.
I use RANISH to partition the disk and hide/show some partitions when needed.

- Gparted : A free partition manager/resizer like Partition Magic with partition hide/show capabilities, part of several Linux distributions.

- GRUB : A boot manager which installs on first track of HDD (outside all defined partitions), part of some Linux distributions.

- SystemRescueCD : A multi-boot CD available at : http://www.sysresccd.org/Main_Page
You can dowload an ISO image of this CD and boot it as a Linux system with various tools or as a DOS system to run RANISH.
SystemRescueCD includes Gparted, a free partition manager/resizer like Partition Magic, and tools to install and configure GRUB.
Unfortunaly, the Linux part of SystemRescueCD don't boot on Acer Aspire 9300 because lack of ACPI support.

- You can also create a bootable USB DOS key with the help of HP USB Disk Storage Format Tool available at :
http://www.bootdisk.com/pendrive.htm (look at Method 2)
or use some Linux LiveCD distribution which includes Gparted :
- PartedMagic : A small Linux LiveCD available at : http://www.partedmagic.com/
which can be installed on an USB key and includes various disk tools.
- SLAX : A Linux LiveCD, customizable under Windows, available at : http://slax.hosting4p.com/?lang=en
which can be installed on an USB key (http://www.pendrivelinux.com/2006/09/20/all-in-one-usb-slaxzip/)
- Ubuntu : A full featured Linux LiveCD downloadable at : http://www.ubuntu.com/

Good luck

This discussion is closed to new replies.