Question Locked

Installing Windows 2003 Server on a Verari systems H246 dual Opteron

0 helpful
8 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Hi,

I'm really hoping someone can help me. I recently purchased two of these servers

http://www.geeks.com/details.asp?invtid=VERARI-SERVER-1B&cat=SYS

I'm trying to install Windows 2003 Server Standard but the server gives a BSOD during setup with a STOP 0x0000007B error.

I'm pretty sure this is related to the fact that W2K3 server does not have SATA drivers.

So, it seems as though I have one of two options:

1. Go into the BIOS, find a compatibility mode and change it from SATA to ATA

or

2. Find some SATA drivers, put them on a floppy and use F6 during setup.

Option 1 seems to be out, since the BIOS only seems to allow you to say whether the OS supports HCPI or not. If I say no, I can't get the server to boot.

Option 2 seems to be my best choice but I don't have a manual or a data sheet, so I have no idea what drivers I need (don't know what kind of SATA controller is in this thing).

Has anyone been through this or can point me in the direction of the drivers ?

Many thanks,
Mark Lee

8 replies

by oh smeg

I can not find out vary much at all about these small Blades and the Makers Web Site is next to useless.

Though if it is just the SATA Drivers that you are looking for I would try a Live Linux and see if that will load and identify the SATA Chip Set Type of the Controller.

If it does you can then search for the SATA driver for the version of Windows that you want to use here you can get a Live Linux as a Cover Disc at your Local Newsagent as a Cover Disc or download one from here

http://www.livecdlist.com/

Personally though I would recommend Mandriva 2009 as it seems to pickup all of the more common hardware and runs with it as a Live Linux it's available for download here

http://www.mandriva.com/en/download/free

You also have another alternative and that is to Slipstream the SATA Driver onto a Install Disc made for these Blades by using a product like nLite available here

http://www.nliteos.com/download.html

Don't forget to read the instructions available here

http://www.nliteos.com/guides.html

Or use the directions here to make your own Slipstreamed Install Disc

http://articles.techrepublic.com.com/5100-10878_11-6150784.html?tag=rbxccnbtr1

Col

by thelizardbloke

Thanks for the quick responses guys. I cut a ticket with their support people last night and got a response from a real person within 30 minutes. Hopefully this bodes well for a solution.

I was thinking about some way to query the hardware, so the Linux option may be the way to go.

In the meantime, if anyone out there has experiences with Windows installs on these servers I would really appreciate the benefit of your insight.

Once again, many thanks to you both.

by thelizardbloke

Well, I got a response from Verari but I'm not really much further forward.

According to their records one of the servers used an Intel S5000 board the other used a Tyan board. The one they told me was an Intel is definitely a Tyan K8. This board uses a Silicon Image SiI3114 SATA controller.

I have been unable to find a driver that will work with the textmode setup in W2K3 Server. I tried every version available from the SI website. I got an error each time that "Windows could not find any hard disks on your computer".

The Tyan site has a 33MB zip file that does not seem to contain anything useful.

I think I've hit a brick wall here.

Can anyone point me in the direction of a driver that will work (I should mention that I'm using W2K3 Server Standard Edition, which I'm thinking is 32 bit) ?

Best regards,
Mark Lee

by hplabude

Make sure you confirgure (via BIOS) the RAID the way you want to use it BEFORE installing Windows. The drivere itself (which you load during setup via F6) can be found here: ftp://ftp.tyan.com/RAID/siliconImage/SATA%20RAID/Vista_32/SiliconImage_SiL3114_SATARAID_Vista_32.zip

by hplabude

In case you do NOT want to use a RAID use this SATA driver: ftp://ftp.tyan.com/RAID/siliconImage/SATA/Vista_32/SiliconImage_SiL3114_SATA_Vista_32_bit.zip

by thelizardbloke

Thanks so much for the links. This is exactly what I was looking for.

Best regards,
Mark

This discussion is closed to new replies.