Question Locked

installing Windows XP pro

0 helpful
3 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

hi guys,

I have a pc and a bootable winxp cd..but when i put it in my CD withouth any floppy disk nothing happens after BIOS. i found a win98 booting flopy disk but after it checks the buses it does a serries of checks and then says: "A:/>"
what shall i do?

the PC had a win XP pro instaled on D and nothing on C but just when instalation finished drive C was formated so i guess it has lost all the boot info and.. winXP usualy puts there.

3 replies

by thumbsup2

If your WinXP CD is bootable, all you should need to do is make sure the BIOS is set to allow booting to the CD before the HDD. Leave the floppy out of the drive. A Win98 floppy won't do you any good.

And, one last thing to check is that the CD Drive itself is working. You'll need to check that by putting it into another computer.

by 45geek

You say that you get the A:/> prompt. You can check if the CD drive is working by just typing in C: and then "Enter" if the prompt changes to C:/> enter dir at the prompt if you can see a list of files the CD drive is fine and you need to press the delete key or other key combination to enter bios and set it to look at the CD Rom for it's first boot loader sequence.
It is easier to check it this way then putting in into another box. If you can change the prompt and see files the drive is working fine. If you can't then try it in another box to make sure it is dead. Also if you listen really close you should be able to hear it spin up when booting.
Good Luck.

This discussion is closed to new replies.