10 replies
by gerrymar Accepted solution
by snuffy09 Accepted solution
This will cutdown on the time it would take Automatic updates to download SP3.
download sp3 here http://www.microsoft.com/downloads/details.aspx?FamilyID=5B33B5A8-5E76-401F-BE08-1E1555D4F3D4&displaylang=en
burn it to a disk
you will still need to download the updates that came after sp3 but they dont take too long.
by gerrymar Accepted solution
by peconet tietokoneet Accepted solution
Since you have Windows with sp2, you only need to download and burn to CD the ISO image of SP3.
Download here:
http://tinyurl.com/6o9kdp
When burnt to CD, load on the Windows disk, then your motherboard drivers, then your graphic card drivers, when done load on the Windows SP3 disk. Do NOT LOAD any updates from the internet just yet. It takes a while when it has loaded all from the disk. When finished then you can go to the Windows update site.
Hope all goes well.
by gerrymar Accepted solution
Seems like you've don't this before. Thanks for the link and the procedure, I'm going to give it a try. I think Microsoft goes out of their way to make life miserable for us.
Cheers
by peconet tietokoneet Accepted solution
by thechas Accepted solution
Once you download the network install for SP3, you could then use the slip-stream method to integrate SP3 with your SP2 install CD.
As to all the other updates, there is no simple way to recover them from your system in a way that you could install them as part of a new clean installation of Windows.
What I do, is every week I go to the Microsoft download page and get all of the new downloads that are of interest to me.
I store the files along with the download details page in organized folders on my hard drive.
The main reason I do this is that I support many users who only have access to dial-up connections. I can burn the updates to a DVD or external drive and install them without needing to download them each time.
Another thing to keep in mind is that you will not need all of the updates you have installed since the last time you installed Windows. SP3 will take care of a lot of them. Others have been superseded by newer updates and will not be needed at all.
Chas
by gerrymar Accepted solution
I like your tip about storing the files which is the direction I was looking for. It's too bad that I have to do the SP3 upgrade which is what I was hoping to get around as I already have it on my system. Maybe Windows 7 will be simplier ... probably not.
Thanks Again
by oh smeg Accepted solution
Is to make a Slipstreamed Install Disc with a product like nLite available here
http://www.nliteos.com/download.html
Just be sure the read the directions for use on their web site here though
http://www.nliteos.com/guides.html
As others have already said you'll need to download the SP3 Update and the other Patches and for just 1 computer this probably isn't worth the time that you'll spend doing it unless you need to reload often.
The other way to proceed here is to Clone the HDD after you have everything installed and in the case of XP Activated and that way you can recover in a matter of 30 or so minutes and the time required to reload your Data.
You can use Cloning Utilities like Ghost or Acronis True Image or if you don't want to pay for one of these there are several Free Cloning Utilities available here
http://www.google.com.au/search?hl=en&q=Free+HDD+Cloning+Utilities+Download&meta=
For a one off system I would be looking at doing a base install and then cloning an Image to some Media so you can recover from problems quickly latter.
Col
by gerrymar Accepted solution
I do have Acronis which I have used before. Great program. If a fresh re-intall becomes to time consuming I'll probably use it again.
Thanks for the suggest.
This discussion is closed to new replies.
Trending Hardware posts
Sort by Trending