Discussion Locked

Integrated NIC doesn't respond to TCP IP

0 helpful
4 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I'm havingproblems witha PC running W2k, and it's having problems with the NIC, the NIC detect the network but doesn't send any data, I'd removed the NIC and the tcp/ip stack, but didn't work, any suggestions?, the RJ45 cord has signal.

4 replies

by jurages

Your running the w2k. u're nic is detecting ure network fine. but u can't send the data through network. the problem is u configure the ip address and subnet mask is correctly. if ure sub net mask is wrong compare with other pc subnet ip address. if its wrong u can't open any other pc's in ure network.pls check the ip address and subnet mask is correctly configured in your network.

by sergiogro

Thanks, I did it, just can't send any data, I'd ping to main IP, renew IP, but got no answer, I belive could be the tcp socket, net configuration is OK, I'm getting IP from DHCP.

by mageshvin

-r u able to ping the Default gateway??
-do u have any firewall or antivirus program in ur system??try disabling it and the check.

This discussion is closed to new replies.