Discussion Locked

Integrating Windows 2000 and UNIX

0 helpful
7 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

We utilize a very small (12 computer)network running on Windows 2000 Server with all 12 clients running WIN 2000 Professional. Currently we only have the one Server and it performs ALL network services, Domain server, print server, application server, etc.

We also have an IBM RS-6000 running AIX Version 4.3 (UNIX) This server is used to host our e-Commerce business software and in-house order entry software. We are getting ready to change both these software systems to another product from a different comapany. The new software runs on a WIN 2000 platform exclusively. That will leave my UNIX box unutilized.

I am NOT a knowledgeble UNIX user at all.

My question is: How can I incorporate the IBM RS-6000 UNIX system into my Windows 2000 Server network? Can it be used as a Print Server?
Remote Access Server?
DNS Server?
Application Server?

DOes it have to remain a UNIX server? Can this system be purged of UNIX and reformatted with a Windows 2000 system?

Can the external tape B/U on the RS-6000 be used to perform B/Us of the Windows 2000 system files?

etc., etc., etc., I guess I need a goog reference book recommendation on Windows 2000 and UNIX operating systems -

Thank you for your help!!

Dave Williams
Metro Office Products
Belcamp, MD
(410) 297-6666
dwilliams@mymetroofficeproducts.com

7 replies

by timwalsh

Dave,
The short answer is that no it can't run any Windows software because of the processor it uses. Windows, in general, will only run on the x86 family of processors.

Therefore, if you wish to continue using the system it will have to run a UNIX/LINUX OS.

Can it be used for something else? The short answer is yes. My counter to this is: If your are unfamiliar with Unix, why go to the trouble of learning Unix just so you can run a function that is already be run (I'm assuming satisfactorily) by your Win2K box. It would probably be a lot easier to offload some of the functions to a second Win2K server.

Can the external tape B/U be used to backup the Win2K system?

From the RS/6000: possibly, but you would need to understand how to connect a Unix box to the Win2K network; you would need to understand how to make the RS/6000 backup software recognize and access files sitting on a Win2K network.

From the Win2K server: it depends; if the tape drive uses a standard SCSI interface, and you have a SCSI card on your Win2K server, and you can obtain the proper drivers for that particular tape drive, then the answer is yes.

I think you would be better served by seeing if there is a market for used RS/6000s (I found one site immediately by searching Google - www.tcdigital.com), than trying to find a use for it and making it work correctly, in your Win2K domain.

by sgt_shultz

i believe that if you install samba on your unix box that you will be able to see it in your win2k network neighborhood. it can function as a file and print server, wins server etc...samba will run on almost any flavor of unix, i'm told...
ibm has a nice 'redbook' on samba on linux available for free download. or, visit the samba project at www.samba.org
you could stick Linux on there and have lots and lots of free support getting it to work and getting it on your network...
have fun and go for it...

by paulo.sedrez

To give a more complete answer, I need to know which model of RS-6000 do you have. This is usually glued to tha case (F50, B80, E30, etc...) or the first 4 digits of the serial number (7026 or similar).

The RS-6000 with AIX is only usefull with applications designed for it. On the usual network services, it can be called low end.

It does a fine service as database server. Oracle, Ingres, Informix, DB2 and others work like a charm.

You can use it as a Samba server: disk, WINS, networkedprinters can be served to Win2K that way. But disks for IBM are quite expensive, so unless you have a lot of disk space it is not worth it.

You can use as a mail server, but the sendmail version AIX provides is very outdated.

You could use it as a DNS server, but the bind version provided is even more outdated. It does not provide dynamic DNS, something Win2k uses extensivelly.

I don't know twhat kind of Backup Unit you are referring to. If it is an external DDS[234] SCSI tape drive, you have two options: get an network backup software that provides an AIX agent (ARCServ, Netbackup, or other) and use it to backup your entire network; or you can remove the tape drive from the RS-6000 and use it in other PC type server. If it is an external multi-tape robot, the you probably have only the first choice.

RS-6000 uses Power or PowerPC processors, with MCA and/or PCI buses. They are limited to AIX and, for some models, to Linux. Micro$oft dashed its PowerPC Windows program a long time ago (do you remeber? there was MIPS and Alpha versions no logn ago).

An RS-6000 with Linux is a whole new game. The selection of software for it scales to thousands. You could turn that machine in your DNS server, mail and webmail server, web proxy and cache server, Samba server, and much more.

--Sedrez

This discussion is closed to new replies.