Question Locked

Internal Domain users cannot access external resources

0 helpful
8 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Hi everyone,

I have a small windows 2003 AD domain setup with around 15 users called "example.com" runing on 1 server and providing all DNS,File server, DHCP and VPN services.

Unfortunately the domain is the same name as the external website. Webmail has been recently set up by our ISP and the website is now going to have a presence. The problem we have is that we cannot resolve the website internally and we cannot access any of the pop mail accounts internally. Our previous POP mail still works from our previous website and I can access the new example.com pop mail accounts from anywhere except internally.

Obviously this is due to the domain name being the same as the external domain so it is resolving example.com as a internal resource.

How can I get users able to see the website and access their pop mail from the same site internally?

Any help would be apprieciated.

8 replies

by vhrocker

in setting your domain to the a root domain name. The way I usally set up is by naming in [name].local or [subname].[name].com

However, unless you plan on going through what I believe is a long drawn out procedure or renaming your domain, which may or may not be feasible for you, there's an "easier" way.
You can add some configuration to your local DNS. In the DNS snap-in you'll see your "example.com". Simply right click, and add New Host(A)" You'll probably want to add a POP, WWW, SMTP, etc. Keep in mind that you'll have to do this for every sub-name. You will also need the corresponding IP addresses for each of the services (but the domain name server may be enough).

That should get you on the right track. Let me know please.

~Matt

by p_h_7

Thank you for your speedy reply. Yes I want to try and avoid migrating the domain to another name as there are only a couple of services required at this stage.

I added 'A' records for www and mail(as mail is used for both pop and smtp traffic) to the DNS snap-in. I used the public IP address of the website for both however now I get a page cannot be displayed for the website and when I try to send a message out I get the following message:

Your message did not reach some or all of the intended recipients.

Subject: test number 2
Sent: 21/01/2009 16:46

The following recipient(s) cannot be reached:

'xxxx.xxxxxxxx@googlemail.com' on 21/01/2009 16:46
550 5.7.1 ... Relaying denied. Proper authentication required.

I have managed to pick up a test mail sent to the users account.

The strange thing is that outlook's test message system says that the connection is ok and it successfuly sends the test

by p_h_7

after running ipconfig /flushdns

I now have the website resolving correctly.

Just this damned mail problem remaining

by p_h_7

I've obviously been staring at my monitior for far too long....as soon as I enabled 'my smtp server requires authentication' and told it to use the same credentials it all started to work(not a great shock I know)

Thanks again Matt for all of your help.

by normh3

You probably learned more with this one experience then if you had sat in a classroom for 2 days.

by p_h_7

I can safely say that that is true considering that I have sat on a course that covered the pitfalls of this!

Of course, I remember this after the entire domain and all other services were configured!

Thanks guys, I will be sticking around this site to see if I can help someone in sone way.

by vhrocker

you resolved the mail issue, I was about to recommend adding an MX record, not necessary after all I suppose...

My new quote:
(Bad) experience is the best teacher.

Thanks for the thumbs up!

This discussion is closed to new replies.