Question Locked

Internet Browsing very Slow.

0 helpful
6 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Hi,
We just installed ISA Server 2006 on a 100 client Network with two DC. The primary DC are located in Our Main Server Room and the Secondary DC,ISA Server and the internet Connection (ASDL-1MB)are located on another site using a 2mb lease line connection (Speed is ok).
A user which is Authenticating from the PDC browse the internet fast,But a user from the other site which is authenticating from the Secondary DC browse the internet very slow. But For some reason,if i log onto the pc,using a local account the Browsing of internet works Fine.
Is it a DNS or ISA Problem?

6 replies

by retro77

I am assuming you have 2 different IP ranges at the 2 physical sites. Go into AD Sites and Services and create 2 logical sites that matches your physical layout. Then create your subnets and assign them to the correct site. Now drag your DCs from the default/current site to the new sites you created.

Now when users login, they will authenticate first with the DC in their site. The reason you are not seeing the issue as a local admin is because you are not authenticating with a DC. To prove this go to a command prompt and type 'set', hit enter and you will see a line for 'logonserver='.

Good luck and let us know how it goes.

by ron.zoe

Yes i have 2 different Ip ranges at the 2 physical sites. The site at the Main Server Room is 10.0.0.* and the other Site is 10.0.1.*.
Can u give a more detail Explanation of how to create the two logical Sites properly.
would it affect the mail Server at the main Server Room.
Thanx.

by retro77

You open Sites and Services from either a DC or a PC with the adminpak tools installed.

Expand Sites, Right click, select new site, type in the name [I use city names or building numbers], hit ok. Do this for each physical site you have.

Right click on the Subnets container and select New Subnet. Put in your address and your mask. Select what site the subnet will belong to. do this for each of your sites/subnets.

Now expand the Default First Site, expand servers. You should see your current DCs in there. Expand your two new sites down to the servers container. Now drag and drop you DCs into their correct sites.

Should be good.

by ron.zoe

I create the New Site and Subnets,I place the DC to its proper location.
I restart the client pc but there are some users on other site that still connect to the PDC at the Main Server Room. They were suppose to be login on to The Dc at The other site.

by retro77

Are they all XP clients? Its going to try the DC in its site first. Odd that it didn't authenticate there. Is the subnet mask on the client, the same as the one in your AD Sites and Services Subnet?

This discussion is closed to new replies.