7 replies
by robertd.
by curlergirl
Here's what to do:
1. Make sure that your alias and Site addressing options in Exchange Admin are set to properly configure your users' SMTP addresses. For example, if the users' addresses should be configured as "JDoe@domain.com", make sure thatthe Site Addressing Tab in the Site Addressing object has "@domain.com" listed for SMTP addressing, and make sure that the Tools/Options/Auto Naming tab has First Initial Last Name listed for Alias name generation. If you haven't already got this pre-configured correctly, you may have to do some manual editing of alias names and/or SMTP addresses on individual mailboxes.
2. Make sure that your DNS server has an MX record pointing to your Exchange Server. If you're using your ISP's DNS servers, you'll have to contact them to add this record for you. This is KEY - you will not be able to receive any external email until this is done, no matter what else you do.
3. If not already set up, add the Internet Mail Connector - in Exchange Admin, click File/New Other/Internet Mail Server and follow the wizard to add the service. Edit settings as follows from Exchange Admin/Connections/Internet Mail Service.
4. If using a dial-up connection, configure the dial-up connections tab in the IMS to use the appropriate connection.
5. On the Connections tab of the IMS, configure the service for Inbound & Outbound Transfer Mode and set it up to connect to the ISP's server for message delivery. In most instances, you want to use the "Forward to specific host" option and specify the ISP's smtp or dns host name in the box.
by curlergirl
Here's the rest of it:
You should be all set at this point, unless you have a firewall or proxy server. If that's the case, there are some settings that will need to be changed - you must open port 25 (SMTP) and there are other settings changes that need to be made if the proxy server and Exchange Server are on separate machines. Email me if you need help with this (synergy@synoffsys.com).
Hope this helps!
by robertd.
Big time thanks!!! I got everything set yesterday, and started to receive outside E-mail this morning. I greatly appreciate the time and effort you put forth to set the details in order. Thanks, Robert
rtdouglass@safeguardsecurity.com
by lordinfidel
Realistically they will probably not be "forwarding" mail to your exch server. They will probably change the mx record to point to your mail server rather than theirs.
With that, you will need to set up your mail server with the IMS. It will take some configuration which is a little more detailed then what I can write down here.
Basically after you have your IMS configured and running. Create a mailbox and see if you can send mail to it. This can be a pain if you do not have a spare domain name to use.
But you can always set up the mail server using the same domain name(s), point a client to it, and try to send mail to let's say a hotmail account. If the hotmail account can get the mail then 10 to 1 odds you will be able to receive mail also.
I reccomend 2 books for you to read.
1. MS Exch Server Training from MS press
2. Managing MS Ech Server from O'Reilly
I also suggest getting Mcaffee Groupshield for exchange and set it up to block file extenstions.
Exchange can be a nasty beast if you don't read up on it. But if you can tame it, you will find it to be an extremely powerful, flexible and stable mailing system.
Setting up the IMS is pretty straight forward though.
by robertd.
by robertd.
This discussion is closed to new replies.
Trending Windows Forum posts
Sort by Trending