4 replies
by vikrantgajjar Accepted solution
by hal 9000 Accepted solution
All that may be required to to run the Network Setup Wizard on your Desktop computer.
When you run this select to use different settings and then select [b]This computer connects directly to the Internet and other computers connect through this one.[/b] then select your LAN connection that is being used which appears from your description to be Connection 5 then click on Next Allow File & Printer Sharing if you are allowing the two machines to access the one printer and share files and then make sure that they are both on the same workgroup and when the Wizard is finished reboot if asked.
If this doesn't work you'll need to get the Instruction Manual for the WiFi Router and enter the HTTP address in the address Bar of a Web Browser then the correct User Name & Password and once you are into the Routers internal settings you'll need to make sure that everything is set as per the Instruction Manual and also add your ISP User Name & Password so that it actually works if this is a Modem Router Combination. if you are unable to get into the Router with the Default User Name & Password you can reset the unit by pushing the small switch on the back of the Router with a Ball Point Pen or something similar that will actually work the switch to clear the router. Then it will be at it's default Factory Settings and you'll be able to get in through the HTTP Address and using the Default User Name & Password though you'll have to perform a complete setup on the unit.
You need to follow the instructions for the Router and when you have finished resetting it the unit should reboot and then after this has happened you'll be told to log out of the Router and you may have to run the Network Setup Wizard again if it's not working now.
Col
by jamesmondtan Accepted solution
by jamesmondtan Accepted solution
This discussion is closed to new replies.
Trending Networks posts
Sort by Trending